|
Other Products
JPS Communications
www.jps.com
 DRP-1000 Transportable Interconnect System
JPS Communications designs, manufactures and sells electronic hardware and software products that enhance the effectiveness of high-frequency radio and land mobile radio communications systems. Products include: VoIP technology, intelligent interconnects, radio/telephone interface units, voice modulation recognition systems, voting products, HF pre/postselectors, switch matrices, transportable products and noise reduction systems. These radio interconnect products facilitate communications between two-way radios (HF and VHF/UHF) and various other media, such as other radios, and cellular or landline telephones. JPS' signature product, the ACU-1000/TRP-1000 Intelligent Interconnect System provides, interoperability between multiple radio systems operating on different frequencies in order to simplify communications for public safety, military and railway, as well as, federal and local governments.
JPS' ACU Interoperability Products can solve your communications interoperability needs. The ACU-1000 can interconnect up to 24 devices. If you need a smaller solution, the ACU-T has all the functionality of the ACU-1000 but in a smaller, more portable design.
Back to top
Federal Signal
www.federalwarningsystems.com
Informer
The InformerTM
Tone Alert Receiver
Low Band, VHF and UHF
The Informer is a new tone-alert radio designed specifically for the emergency management market. The Informer includes a commercial grade radio receiver available in Low, High, and UHF bands. The standard product will decode Single Tone, Two-Tone Sequential and DTMF protocols. Options include EAS/SAME or Federal's new digital protocol, and tone-or digital-coded squelch. The Informer comes with a UL certified wall transformer and a battery back-up system that can provide more than 1-1/2 hours of full monitoring or multiple hours in standby mode. In addition, the Informer can be purchased with a 600-ohm and dual relay output to port the audio to a PA system or to drive a strobe light for the hearing impaired, or other devices utilizing a contact closure. With an 85dBA sound pressure rating at 10 feet, the Informer is sure to get the attention of users, even in noisy environments.
Siren Controller
Software Programmable Versatile Siren Controller.
Siren Controller Applications:
- Control of existing or new sirens
- Radio activation and control of PA systems and/or lights
- Control of warning lights
- Open gates, garage doors
- Shut off power, gas, etc.
The Federal Controller is a radio receiver/decoder and timer with relay outputs. The versatility of the FC makes it an ideal choice for virtually all siren control applications and any other process that can be controlled via relay contacts. The FC can operate from 120 or 240 VAC, 50/60 Hz and is neatly packaged in a compact weather resistant enclosure.
Model 2 Siren
2 HP Omni-directional Siren
Federal Signal's Model 2, outdoor warning is an omni directional siren capable of producing intense warning signals over a large area. The highly efficient Model 2 produces a single tone sound level of 102 dBC at 100 feet on axis while making moderate power source demands. The siren can be installed on a roof or a utility pole.
A timer can be purchased separately to enable the siren to produce one to three signals. The AR timer can produce a timed wail or steady signal, and the FC will produce a wail, steady or fast wail signal.
Back to top
Zetron
www.zetron.com
Zetron Paging Systems
Paging infrastructure sets up a wireless paging network through which users send and receive voice, numeric, and alphanumeric pages.
Zetron supplies paging solutions for many applications, ranging from small, private paging systems to large, public paging networks.
Commercial paging operators offer airtime on public paging networks to a wide range of companies and individuals. Subscribers pay a monthly invoice for pager rental and airtime usage.
An on-site paging system establishes a private paging service to ensure that personnel can be contacted at all times. On-site paging systems are also used for process and procedure management.
The key to Zetron's success is that it has a broad range of products so a system can be configured to precisely meet the budget and need of most paging applications.
A modular architecture ensures that Zetron systems offers cost-effective performance today with an upgrade path for tomorrow's growth, feature enhancements, and technology adaptations.
Zetron Fire Station Alerting
Model 6/26 Fire Station Alerting
Zetron's Fire Station Alerting System allows a single communication center to efficiently respond to emergencies by managing the assets of multiple fire stations. The Model 26 status/control panel provides centralized control of remote fire stations. Up to 240 user-defined buttons with LED status indicators allow the operator to select targeted fire stations, send alerts, and control auxiliary equipment. Changes in the status of personnel and vehicles are reflected on the M6 and M26 status indicators. Visual indications help the operator select which stations should respond, as well as, determine which vehicles are available, which have already been dispatched, which are out of service, etc. Up to 15 Model 26 panels can provide multiple positions with full parallel operations.
Typically, the Model 26 is connected in parallel with the dispatcher's console such that fire dispatch appears as a channel on that console. Depending upon the needs and desires of the local fire station, the Model 6 may automatically open bay doors, control traffic lights, etc. As a Fire Station Alerting System, the Model 6/26 alerts multiple fire stations from the control center. The control center equipment consists of the Model 26 Fire Station Dispatcher, presenting the system controls as a control panel or as an interface to a Computer Aided Dispatch system. Each fire station is equipped with a Model 6 Station Transponder linked to the control center over private wire or radio link.
Zetron Alarm Monitoring and Control / SCADA
The operation of many industrial, facilities, natural resources, and utilities depends upon equipment and processes that are remote.
Zetron's remote monitoring line offers these organizations tools to quickly identify problems and remotely manage and control equipment and processes. Fortunately, low-cost, high-speed computer and communications technology enables any organization, regardless of size and budget, to automate and centralize the management of the operation.
Since most equipment has monitoring instrumentation, it is straightforward to install an electronic device that collects this information and forwards it over a wireless or wired communications network to a central location.
A person or computer can analyze the information, decide what action to take, and dispatch a person to the location. With added intelligence, the remote electronic device or central computer can automate the process by analyzing the information it collects, selecting the appropriate action, and correcting the problem by sending control signals that change the status of the equipment.
Zetron SCADA, telemetry, and alarm processors support the transfer of data over conventional and trunked wireless networks, and cellular, dial-up, and leased-line telephone circuits. Using a wireless network as the transport medium instead of wires is often more economical.
Zetron wireless alarm, monitoring and control systems offer tangible, real savings in traditional hardwired and leased-line applications, as well as, in new automation opportunities where hardwired systems are technically or economically impractical.
Back to top
Whelen Emergency and Industrial Vehicle Warning Systems
www.whelen.com
Whelen LED, strobe and halogen light bars set the standard for state-of-the-art emergency warning.
Whelen's leading emergency warning systems in tandem with professional installation services from Northeastern Communications provides you with the very best combination of products and services to meet your emergency warning needs. Whelen's diverse product line means that your choices are virtually unlimited.
Whelen offers multi-level warning lighting for every application with various options, such as strobe, halogen and LED, self-contained and remote, dash or deck mounting, hide-away, grille mounting, surface or flush mounting. You pick the size, mounting configuration and light output requirements and Whelen can provide it.
From tiny "Hide-A-Way" strobe tubes which mount inside headlight and tail light assemblies, to pole mounted beacons, to semi-flush or surface mounted directional light heads, Whelen features a variety of options.
There are certified, highly effective traffic clearing siren speakers in a wide range of models. Optional switch brackets are available for up to four PC switches.
Whatever your emergency warning and signaling needs for fire, police, ambulance, DOT, towing, construction or rescue, Northeastern Communications and Whelen have a complete, certified system to meet your specifications.
Back to top
EXACOM - Digital Recording Systems
www.exacom.com
EXACOM is a leading manufacturer of digital communication recorders.
Exacom's products are used by 911, police and fire, air traffic control and marine radio communications centers throughout the world. In addition to archival digital and short term recorders, their product line includes computer telephony integration interfaces, voice/fax call processing systems and telemanagement/call accounting systems.
With 10 years of experience manufacturing single and multi-position digital recorders for the emergency services industry, Exacom's "Hindsight" series of archival digital recorders combines instant recall with archival storage utilizing DAT and other technologies. Exacom's "2000 POR" series is the ideal recording platform to be implemented in areas where installation space is at a premium. This includes specialty vehicles such as first response units or mobile communication centers. Whether your recording requirements include a large dispatch operation or a specialty command vehicle EXACOM has the right product for the job.
Back to top
Liebert - Uninterruptible Power Supplies
www.liebert.com
Every critical system should be protected with an uninterruptible power supply. Northeastern Communications and Liebert have state-of-the-art power supplies available to meet any need.
Basic Protection - for single PCs or workstations where downtime is tolerable, but data loss must be avoided. The UPS should be able to provide enough back-up time for a graceful shutdown of the protected equipment.
Network Protection - true on-line protection for network servers, bridges, hubs, routers, storage devices and critical workstations. The UPS may require extended battery time to provide adequate ride-through of shorter outages, as well as, enough time for a graceful shutdown of the system in the event of an extended loss of utility power.
Northeastern Communications features a full line of Liebert uninterruptible power supplies for every application. Visit Liebert to view additional products and for products specifications or contact us for more information.
Back to top
Havis Shield - Consolidator
www.havis.com
Consolidator Consoles simplify installation of communications equipment and control heads in vehicles. Their unique "slide tracks" and easy-to-use mounting systems leave a vehicle's equipment well organized, conveniently located, and fully adjustable. Consolidator also offers a comprehensive list of vehicle applications for mobile computers, CDPD modems, and other communications equipment. Northeastern Communications and Havis Shield can partner to design a custom vehicle application.
Back to top
David Clark
www.davidclark.com
David Clark is a leading manufacturer of headsets and headset systems for public safety, industrial and avionic applications. David Clark's reputation is unsurpassed for quality and reliability. They feature a wide range of headset types and interfaces.
Northeastern Communications and David Clark can design a custom fire/EMS headset system for your vehicle. A headset system will allow all passengers in the vehicle to communicate with each other and receive radio transmissions, while selected passengers have the ability to transmit and receive on the radio.
Back to top
Otto Communications, Inc
www.ottoeng.com
Otto's experience in electrical man-to-machine interfaces, along with continuous growth enabled OTTO to utilize its knowledge and expertise from their Controls division for expansion into the communications marketplace. OTTO Communications is a division specializing in communication accessories for the two-way radio market.
Otto Communications develops solutions that provide clear transmissions no matter what the environment or situation. Their strong vertical integration allows them to particularly focus on mechanical and electrical interfaces, environmental stress screening, optimal RF design, audio performance testing and comprehensive production testing.
Whatever meets your needs...
- Noise-attenuating headsets with a certified noise reduction of 24dB.
- Lightweight headsets.
- Remote speaker microphones.
- Low-profile "surveillance" earphone kits.
- Tactical communications equipment.
- Earphones, ear tips and other accessories.
Back to top
Pyramid Communications
www.pyramidcomm.com
Pyramid Communications designs and manufactures wireless data and voice transmission equipment. Pyramid Communications commitment to quality and customer satisfaction has made them a leading manufacturer in the wireless communications industry. All products are tested throughout the manufacturing process to ensure reliable product performance.
The Pyramid Communications model SVR-200 is a microprocessor controlled, synthesized low power vehicular repeater. It is designed to interface between a high power mobile radio and a low power handheld. If the radio operator is out of the vehicle and the mobile radio is receiving a transmission, the SVR-200 will repeat the signal to the user's handheld. The user may also transmit back to the SVR-200 via their handheld, and the transmission will be repeated back to the base by the high power mobile radio, effectively extending the range of the low power handheld. On-board logic, controlled by the microprocessor, ensures that only one (priority) vehicle will become active as the repeater, in the event several vehicles equipped with the SVR-200 arrive at the same scene. The on-board logic can also switch priority vehicles in cases where the priority vehicle leaves the scene (or fails), or another priority vehicle arrives from another scene. For more information on the SVR-2000 in-vehicle repeater or to see other Pyramid Products visit their website.
Back to top
|
